Yanmar 4LHA-HTP Operation Manual page 585

Chapter 7 Reduction and Reversing Gear
4. Disassembly
6. Remove dipstick by turning (counterclockwise) and pulling
at the same time.
7. Inspect seal for wear and replace if necessary.
'—<w—'
a - Seal
BREATHER VALVE
8. Remove breather valve. Clean with suitable cleaner, allow
to dry and coat with oil.
a - Breather Valve
MOUNTS
9. Remove mounts from transmission housing. Inspect
mounts for damage and replace if necessary.
a - Transmission Mount
b - Retaining Screws (4 Total on Each Mount - One Hidden In This
View)
7-2-11
4LHA Serie.