Yanmar 4LHA-HTP Operation Manual page 543

Chapter 7 Reduction and Reversing
2. Shifting Device
2-4 Clutch shifting force
Shift lever posi-
\ Shifting position
tion at 56mm
Shifting direction \ ^
Engaging force
2 9 ~ 3 9 N
( 3 - 4 k g f )
at 1000 rpm
Disengaging force 59--78N
( 6 - 8 k g f )
at 1000 rpm
2-5 Adjustment of shifting device
Whenever the side cover, shift lever shaft, shifter, stopper
bolt or drive cone is replaced, be sure to adjust the clear-
ance between the shifter end and the stopper bolt with
shims. If the adjustment of this clearance is inadequate,
the drive cone may not connect properly w h e n the shift
lever is moved to the neutral position, either from the
clutch gear (A) or clutch gear (B) position.
Gear
Remote control handle
position at 170mm
• (Cable length, 4m)
3 9 - 4 9 N
( 4 ~ 5 k f )
g
6 9 ~ 9 3 N
(7-9.5kgf)
Clutch gear (A) side
Clutch gear (B) side
7-1-7
C.C.W.
Shifter top clearance
4LHA Series
mm (in.)