8J (-Z D53); M12 Connector For Connecting The External Position Detection System (-Z D54); M12 Connector For Connecting The Outputs Of The Sia Module 6Dr4004-6G /-8G (-Z D56); M12 Connector For Connecting The Outputs Of The Position Feedback Module 6Dr4004 6J / 8J (-Z D53) - Siemens SIPART PS2 Operating Instructions Manual

5.2.5.3 M12 connector for connecting the outputs of the position feedback module 6DR4004-
6J / 8J (-Z D53)
You have a positioner with order suffix -Z order code D53. In this version of the positioner,
an M12 connector is used to electrically connect the current output of the position feedback
module.
Table 5- 3
Current output terminal
61 (+)
Shield support of housing
62 (-)
5.2.5.4

M12 connector for connecting the external position detection system (-Z D54)

You have a positioner with order suffix -Z order code D54. In this version of the positioner
the M12 connector connects the external position detection system with the built-in EMC
filter module (C73451-A430-D23).
Table 5- 4
Terminal
POT (X1/2)
VCC (X1/4)
GND (X1/1)
VREF (X1/3)
5.2.5.5 M12 connector for connecting the outputs of the SIA module 6DR4004-6G /-8G (-Z
D56)
You have a positioner with order suffix -Z order code D56. In this version of the positioner,
an M12 connector is used to electrically connect the outputs of the SIA module.
Table 5- 5
Alarm output terminal
41 (+)
52 (-)
42 (-)
51 (+)
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB
Assignment diagram
Assignment diagram
Assignment diagram
Connection
5.2 Electrical wiring
Pole designation
1 - Brown
4 - Black
3 - Blue
Pole designation
3 - Blue
1 - Brown
4 - Black
2 - White
Pole designation
1 - Brown
4 - Black
3 - Blue
2 - White
95