Connection
5.2 Electrical wiring
Connection diagram for mechanical limit switch modules 6DR4004-6K and -8K
①
Non-hazardous area
②
Hazardous area
③
Mechanical limit switch module
④
Fault message
Figure 5-12
Mechanical limit switch module
Procedure
1. Loosen the screw
2. Pull the transparent cover
3. Tighten every cable in the corresponding terminal.
4. Slide the transparent cover
92
⑤
⑥
⑦
①
on the transparent cover
②
up to the front end stop.
②
up to the end stop of the basic electronics.
Limit
Switching amplifier
Switching output
②
.
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB