External Position Detection System; Rated Conditions For External Position Detection System; Construction For External Position Detection System - Siemens SIPART PS2 Operating Instructions Manual

Technical data
12.8 Option modules
12.8.8

External position detection system

12.8.8.1

Rated conditions for external position detection system

Ambient temperature
Perm. ambient temperature for operation
•
Degree of protection
1)
Climate class
Storage
•
Transport
•
Operation
•
) Impact energy max. 1 joule.
1
12.8.8.2

Construction for external position detection system

Construction
How does it work?
Range of stroke (linear actuator)
•
Angle of rotation (part-turn actuator)
•
Mounting method
On the linear actuator
•
On the part-turn actuator
•
Material
Enclosure
•
Weight, basic device
Torque for cable gland nut made of plastic
260
In hazardous areas, observe the maximum permissible
ambient temperature corresponding to the temperature
class.
-40 ... +90 °C (-40 ... +194 °F)
IP66 to IEC/EN 60529 / NEMA 4X
According to IEC/EN 60721-3
1K5, but -40 ... +90 °C (1K5, but -40 ... +194 °F)
2K4, but -40 ... +90 °C (2K4, but -40 ... +194 °F)
4K3, but -40 ... +90 °C (4K3, but -40 ... +194 °F)
3 ... 130 mm (0.12 ... 5.12") (angle of rotation of the posi-
tioner shaft 16 to 90°)
30 ... 100°
Using mounting kit 6DR4004-8V and, where necessary,
an additional lever arm 6DR4004-8L on actuators accord-
ing to IEC 60534-6-1 (NAMUR) with a fin, columns, or a
plane surface.
Using mounting kit 6DR4004-8D on actuators with mount-
ing plane according to VDI/VDE 3845 and IEC 60534-6-2:
The required mount must be provided on the actuator-
side.
Makrolon® glass-fiber reinforced polycarbonate (PC)
Approximately 0.9 kg (1.98 lb)
2.5 Nm
Operating Instructions, 02/2016, A5E00074631-AB
SIPART PS2 with and without HART