Siemens SIPART PS2 Operating Instructions Manual page 152

Parameter assignment
9.3 Tabular overview of the parameters
Overview parameter A
Parameter Function
A. PST Partial stroke test with the following parameters:
A1.STPOS Start position
A2.STTOL Start tolerance
A3.STRKH Stroke height
A4.STRKD Stroke direction
A5.RPMD Ramp mode
A6.RPRT Ramp rate
A7.FLBH Behavior after failed PST
A8.INTRV Test interval
A9.PSTIN Reference stroke time for partial stroke test
AA.FACT1 Factor 1
Ab.FACT2 Factor 2
AC.FACT3 Factor 3
Overview parameter b
Parameter Function
b. DEVI Monitoring of dynamic control valve behavior with the following parameters:
b1.TIM Time constant
b2.LIMIT Limit
b3.FACT1 Factor 1
b4.FACT2 Factor 2
b5.FACT3 Factor 3
Overview parameter C
Parameter Function
C. LEAK Monitoring of pneumatic leakage with the following parameters:
C1.LIMIT Limit
C2.FACT1 Factor 1
C3.FACT2 Factor 2
C4.FACT3 Factor 3
152
Parameter values
0.0 ... 100.0
0.1 ... 2.0 ... 10.0
0.1 ... 10.0 ... 100.0
uP / do / uP do
OFF / On
0.1 ... 1.0 ... 100.0
Auto / HOld / AirIn / AirOu
OFF / 1 ... 365
NOINI / (C)##.# / FdInI / rEAL
0.1 ... 1.5 ... 100.0
0.1 ... 3.0 ... 100.0
0.1 ... 5.0 ... 100.0
Parameter values
Auto / 1 ... 400
0.1 ... 1.0 ... 100.0
0.1 ... 5.0 ... 100.0
0.1 ... 10.0 ... 100.0
0.1 ... 15.0 ... 100.0
Parameter values
0.1 ... 30.0 ... 100.0
0.1 ... 1.0 ... 100.0
0.1 ... 1.5 ... 100.0
0.1 ... 2.0 ... 100.0
Operating Instructions, 02/2016, A5E00074631-AB
Unit
%
%
%
%/s
Days
s
Unit
s
%
Unit
%
SIPART PS2 with and without HART