Operating
6.2 Operating modes
Function of buttons:
● The
● The
this button to move the actuator in "Manual" mode.
● The
use this button to move the actuator in "Manual" mode.
Note
Order
Parameters are activated in the reverse order when the
simultaneously.
6.1.3
Firmware version
The current firmware version is displayed when you exit the operating mode "Configuration".
Figure 6-2
6.2
Operating modes
6.2.1
Overview of operating modes
You have five operating modes at your disposal to operate the positioner:
1. P-manual mode (as-delivered condition)
2. Configuration and initialization mode
3. Manual mode (MAN)
4. Automatic (AUT)
5. Diagnostics
106
button is used to select the modes and to forward the parameters.
button is used to select parameter values in "Configuration" mode. You can use
button is also used to select parameter values in "Configuration" mode. You can
Firmware version, e.g. Version 5.00.00
and
buttons are pressed
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB