Introduction; Purpose Of This Documentation; History - Siemens SIPART PS2 Operating Instructions Manual

Introduction

1.1

Purpose of this documentation

These instructions contain all information required to commission and use the device. Read
the instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
1.2

History

This history establishes the correlation between the current documentation and the valid
firmware of the device.
The documentation of this edition is applicable for the following firmware:
Edition
02/2016
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
02/2016
See also
Structure (Page 21)
Positioner with flameproof enclosure (Page 265)
Tabular overview of the parameters (Page 147)
Diagnostics (Page 207)
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB
Firmware identifier nameplate
As of FW 5.00.00
Note
1. Section Installing/mounting (Page 35) > Simpler commissioning of part-turn ac-
tuators using coupling wheel with two pins
2. Section Technical data (Page 243) > Expansion of permissible ambient tempera-
ture for operation at -40 °C for SIPART PS2 device version with and without
HART; Order suffix -Z M40
1
13