Ydir' Direction Of Manipulated Variable For Display And Position Feedback - Siemens SIPART PS2 Operating Instructions Manual

Figure 9-4
Figure 9-5
See also
'39.YCLS' Tight closing with manipulated variable (Page 166)
9.4.2.10

'38.YDIR' Direction of manipulated variable for display and position feedback

Possible settings:
Purpose:
Factory setting:
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB
Example: YNRM = MPOS with YA = 10 % and YE = 80 %
Example: YNRM = FLoW with YA = 10 % and YE = 80 %
• riSE
• FALL
This parameter is used to set the direction of action of the display
and the position feedback I
riSE
Parameter assignment
9.4 Description of parameters
. The direction can be rising or falling.
Y
165