Connecting The External Position Detection System To The Emc Filter Module - Siemens SIPART PS2 Operating Instructions Manual

5.2.3

Connecting the external position detection system to the EMC filter module

Requirement
You need the EMC filter module with article number C73451-A430-D23 for the electrical
connection of an external position detection system, article number C73451-A430-D78, to
the positioner.
Wiring diagram
①
②
③
④
⑤
⑥
⑦
Figure 5-8
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB
EMC filter module terminals
Positioner with integral EMC filter module
C73451-A430-D23
Yellow wheel for locking the position de-
tection
Ribbon cable connector of fitted potenti-
ometer, or ribbon cable connector of EMC
filter module
Basic electronics
Screw
EMC filter module C73451-A430-D23
Connection to positioner
⑧
External position detection system
C73451-A430-D78
⑨
External position detection system termi-
nals
⑩
External position detection system cable
gland
⑪
Cable
⑫
EMC filter module cable gland
⑬
Input signal for positioner
Connection
5.2 Electrical wiring
87