Transportation And Storage; Product Information; Notes On Warranty - Siemens SIPART PS2 Operating Instructions Manual

1.5

Transportation and storage

To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly
Special conditions for storage and transportation of the device are listed in Technical data
(Page 243).
1.6

Product information

The programming manual is an integral part of the CD, which is either supplied or can be
ordered. The programming manual is also available on the Siemens homepage.
On the CD, you will also find the catalog extract with the ordering data, the Software Device
Install for SIMATIC PDM for additional installation, and the required software.
See also
SIPART PS2 product information (http://www.siemens.com/sipartps2)
Contacts (http://www.siemens.com/processinstrumentation/contacts)
Process instrumentation catalog (http://www.siemens.com/processinstrumentation/catalogs)
1.7

Notes on warranty

The contents of this manual shall not become part of or modify any prior or existing
agreement, commitment or legal relationship. The sales contract contains all obligations on
the part of Siemens as well as the complete and solely applicable warranty conditions. Any
statements regarding device versions described in the manual do not create new warranties
or modify the existing warranty.
The content reflects the technical status at the time of publishing. Siemens reserves the right
to make technical changes in the course of further development.
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB
packaged to provide sufficient protection during transport. Siemens cannot assume
liability for any costs associated with transportation damages.
CAUTION
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
• Provide additional packaging as necessary.
Introduction
1.5 Transportation and storage
15