Omron NV Series Setup Manual page 45

Specifications
Performance Specifications
Item
Model
Display device
Number of dots
Effective display size
Life expectancy
Backlights
Touch switches Method
Operating force
Life expectancy
Switches
Size
External memory
Host communica- COM Port
tions
Support Software Tool port
communications
USB port
Applicable Support Software
NV3Q-MR@1 and NV3Q-SW@1
NV3Q-MR: STN monochrome LCD
NV3Q-SW: TFT color LCD
320 × 240 dots (H × V)
71 × 53 mm (H × V)
*2
50,000 hours min.
NV3Q-MR: LED backlights, 3 colors (white, pink, and red)
NV3Q-SW: LED backlight, 1 color (white)
Analog resistance membrane
0.8 N max.
100 million operations min. (at 25°C)
100 max. per screen
8 dots × 8 dots min.
SD memory card (32 MB to 2 GB)
Manufacturers for which operation has been confirmed: Panasonic
*6
SD standard
NV3Q-@@21: RS-232C (not isolated), Transmission distance: 15 m, Connec-
tor: 8-pin)
NV3Q-@@41: RS-422/A485 (not isolated), Transmission distance: 500 m,
Connector: 8-pin)
---
USB 1.1 type B, Transmission distance: 5 m max.
NV-Designer version 1.0 or higher (Included with CX-One version 4.@ or in
CX-One Lite version 4.@.)
*1 The display device for the NV3Q-SW is an STN LCD for lot numbers
110999 and earlier and an TFT LCD for lot numbers 111000 and later.
*2 This is the estimated time before brightness is reduced by half at room
temperature and humidity. It is not a guaranteed value.
*3 The estimate applies to operation when only custom switches are placed
on the screen.
*4 This is the effective area of a touch switch. It does not include the 1-dot
frame line.
*5 The capacity of the SD memory card is 32 MB to 1 GB for PT system pro-
gram version 1.0@.
*6 Do not reformat the SD memory card using standard Windows functions,
such as that provided in Windows Explorer.
Specifications
*1
*3
*4
*5
Section 1-4
25