Omron NV Series Setup Manual page 108

Configuration Settings from the System Menu
88
SD Memory Card Menu
Manual/Automatic
Used to set the screen settings for when an SD memory card is inserted in the
SD memory card slot.
Precautions for Correct Operation
Up to 16 data items can be saved.
Precautions when Handling SD Memory Cards
It is recommended that data always be backed up by saving it on other media.
Never remove the SD memory card or turn OFF power to the PT while the SD
memory card access indicator is lit (i.e., while data is being read from or writ-
ten to the card). Doing so may cause data to be corrupted.
Data stored on the SD memory card may be lost in the following cases.
OMRON accepts no responsibility for any data that is lost.
The user or a third party use the SD memory card incorrectly.
The SD memory card is subjected to static electricity or electrical noise.
The SD memory card is removed or the power to the accessing device is
turned OFF while the card is being accessed for saving or deleting data.
See Also
For details on SD memory cards, refer to 9-2 Using SD Memory Cards for Trans-
ferring or Copying Data (NV4W and NV3Q), NV-series PT Programming Manual
(Cat. No. V104).
SD → NV
Touch the SD → NV Key to display the SD Memory Card Select Image Data
Screen. Use the Up and Down Keys to select the file.
Select Image Data Screen
[SD→NV]
When you touch the Copy Key, a confirmation screen will be displayed.
Section 5-1