Omron NV Series Setup Manual page 34

Specifications
Functional Specifications
Item
Type
Displayable fonts
Displayable characters
Maximum number of screens
Screen numbers that can be registered
Screen types
Graphics
Parts
Other functions
SPMA functions
Memory Specifications
Item
Type
Memory type
Memory capacity
14
All NV3W models
Fixed (NV-Designer): Half-size characters (8 × 8 dots) or normal characters
(8 × 16 dots) (Magnification is possible on the display to 1×, 2×, and 4×.)
True Type (NV-Designer): 10 to 64 dots
Windows: 10 to 64 dots
Japanese, English, Korean, German, French, Italian, Spanish, Simplified
Chinese, Traditional Chinese, Turkish, Russian, and Vietnamese
Approx. 160 screens
*The number of screens that can be registered depends on the contents of
the screens.
Base screens: 0 to 1,023
Keyboard screens: 0 to 7
Base screens (These screens can be switched externally and parts can be
pasted on these screens.)
Keyboard screens (These screens can be used to directly enter data for data
parts.)
Straight lines, continuous lines, rectangles, circles, ovals, circular arcs, oval
arcs, sectors, oval sectors, rounded rectangles, and bitmaps
Messages, lamps, switches, data, bar graphs, keyboards, line graphs, and
clocks*
*Clock parts can access external clock data and display it. There is no clock
in the PT itself.
Recipes, flowing displays, address writing, and language switching
Communications with a PLC are possible if the computer running the CX-
Programmer is connected to the tool port and a CS/CJ/CP-series PLC is
connected to the COM port.
All NV3W models
FROM (built-in Flash Memory)
*1
384 Kbytes
*1 Refer to 1-4-5 Battery Backup for the data that is saved in memory.
Specifications
Type
Section 1-4