Omron NV Series Setup Manual page 112

Configuration Settings from the System Menu
Operation Security
(NV3W-V1, NV4W and
NV3Q Only)
92
SD Card Menu
The SD Card Menu Screen can be set to be displayed when an SD memory
card is inserted.
• Automatic: The SD Card Menu will be displayed automatically when an
SD memory card is inserted.
• Manual: The SD Card Menu will not be displayed when an SD mem-
ory card is inserted. (Move to the SD Card Menu from the
System Menu.) Select one of the above options. (Default:
Automatic)
Passwords can be changed from the PT.
Additional Information
A switch must be created using a function switch or customer switch to go to the
Password Change Screen or the Password Management Screen by a function
switch or custom switch.
Note Passwords cannot be set from the System Menu.
See Also
For details on settings on the Password Change Screen and the Password Man-
agement Screen, refer to the 8-6 Security Function, NV-series PT Programming
Manual.
Password Change Screen
Use this screen to change the password for the security level of the screen
being created.
If the password entry field is selected, a keyboard will be displayed. Enter the
passwords and then press the ENT Key.
Current Password:
New Password:
Re-type Password:
Touch "Change" to complete changing the password.
Touch the ESC Key to return to the previous screen.
Password Management Screen (Level 15 Only)
At level 15, you can change the settings for all levels.
Screen When an Entry Field
Has Been Touched
Enter the current password.
Enter the new password.
Enter the new password again.
Section 5-1