Omron NV Series Setup Manual page 101

Configuration Settings from the System Menu
5-1-2 System Menu Language
Changing the System Menu Language Using the PT Configuration from the NV-Designer
Setting the System Menu Language from the System Menu (NV3W-V1, NV4W and NV3Q Only)
1,2,3...
Note
3. Select the mode.
Initial Setting Mode Screen
Initial Test Mode Screen
The default language for the System Menu is English.
You can change the language used by the System Menu Language by setting
it on the Setup 1 Tab Page of the PT Configuration from the NV-Designer and
then transferring the PT Configuration to the PT.
Japanese or English
With the NV3W-V1, NV4W or NV3Q, the following procedure can be used to
set the language used by the System Menu to Japanese or English.
1. Touch Language on the System Menu.
2. Select English or Japanese for the System Menu Language.
3. Touch the ESC Key to change the language for the System Menu.
With the NV3W(-V1), user memory will be allocated whenever the language
for the System Menu is changed from English to any other language. This
memory will remain allocated even if the language is later returned to English.
To free the allocated menu, specify deleting screen data before transfer when
transferring the project data to the PT.
Section 5-1
The contrast, clock, memory, and
other configuration settings can be
made from this screen. The specific
settings that can be made are listed
later in this section.
The touch switches, backlight,
buzzer, LCD, contrast, memory, and
other items can be tested from this
screen.
The language will change between
Japanese and English each time
the button is touched.
81