Omron NV Series Setup Manual page 132

Connecting to EJ1 Temperature Controllers Using Modbus-RTU
112
■
DIP Switch
EJ1
Pin Parameter
3 Serial port con-
nection
4 and 5 Communica-
tions baud rate
setting
For details on settings for the EJ1 Temperature Controllers, refer to the EJ1
Modular Temperature Controller User's Manual (Cat. No. H142).
For information on how to specify addresses, refer to the NV-series Program-
ming Manual (Cat. No. V104).
Settings
3 = ON Modbus
4 = OFF, Uses the baud rate
5 = OFF setting for port B
(default: 9,600 bps).
4 = ON, 19,200 bps
5 = OFF
4 = OFF, 38,400 bps
5 = ON
4 = ON, 115,200 bps
5 = ON
Section 6-5
Remarks
Set the same baud
rate as for the COM
port in the NV-series
PT configuration.