Omron NV Series Setup Manual page 103

Configuration Settings from the System Menu
5-1-5 Setting Mode
Display, or Contrast and Brightness
To display the Display Screen, touch "Setting" from the Startup Screen of the
System Menu and then touch "Display" (for the NV3W) or "Contrast&Bright-
ness" (for the NV3W-V1, NV4W or NV3Q) on the Setting Screen.
Display Screen: Contrast and Brightness Adjustment
Accessing Screens
Startup Screen
↓
[Setting]
↓
[Display]
Contrast Adjustment
Touch "Contrast" on the Display Screen to access the Contrast Screen. The
Contrast Screen is used to adjust the contrast of the LCD of the PT.
Contrast Screen
Accessing Screens
Display Screen
↓
[Display]
↓
[Contrast]
Touch Panel Operation
Adjustment The value can be set to between 0 and 14. The contrast will increase
if the + Key is touched and decrease if the − Key is touched. The
number and diamond mark show the setting. The standard setting is
7, for which the diamond mark will be in the center.
Returning After completing the setting, touch the ESC Key to return to the previ-
ous screen.
Brightness Screen
Touch "Brightness" on the Display Screen to access the Brightness Screen.
The Brightness Screen is used to adjust the brightness of the backlight in the
PT.
Backlight Screen
Accessing Screens
Display Screen
↓
[Display]
↓
[Brightness]
Section 5-1
83