Omron NV Series Setup Manual page 20

Application Considerations
Suitability of Use
Programmable
Products
Disclaimers
Performance Data
Change in
Specifications
Errors and Omissions
xx
Omron Companies shall not be responsible for conformity with any standards,
codes or regulations which apply to the combination of the Product in the
Buyer's application or use of the Product. At Buyer's request, Omron will pro-
vide applicable third party certification documents identifying ratings and limi-
tations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in com-
bination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the par-
ticular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND
THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED
FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYS-
TEM.
Omron Companies shall not be responsible for the user's programming of a
programmable Product, or any consequence thereof.
Data presented in Omron Company websites, catalogs and other materials is
provided as a guide for the user in determining suitability and does not consti-
tute a warranty. It may represent the result of Omron's test conditions, and the
user must correlate it to actual application requirements. Actual performance
is subject to the Omron's Warranty and Limitations of Liability.
Product specifications and accessories may be changed at any time based on
improvements and other reasons. It is our practice to change part numbers
when published ratings or features are changed, or when significant construc-
tion changes are made. However, some specifications of the Product may be
changed without any notice. When in doubt, special part numbers may be
assigned to fix or establish key specifications for your application. Please con-
sult with your Omron's representative at any time to confirm actual specifica-
tions of purchased Product.
Information presented by Omron Companies has been checked and is
believed to be accurate; however, no responsibility is assumed for clerical,
typographical or proofreading errors or omissions.