Omron NV Series Setup Manual page 102

Configuration Settings from the System Menu
5-1-3 Prohibiting Displaying the System Menu
Note
5-1-4 Items That Can Be Set from the System Menu
Item
Contrast
Backlight
Communications condi-
tions and COM port
Touch switch adjustment
Clock
Initializing SRAM
Initializing FRAM
SD memory card
System Menu Language
82
You can use a DIP switch setting to prevent anyone other than the system
administrator from changing PT Configuration settings by prohibiting anyone
from displaying the System Menu.
Operating Mode
Switch
Set the operating mode switch on the NV3W-V1/NV4W as shown below.
Correct Method
Back case of
the NV
Operating mode switch
If you attempt to set the switch by using the back case of the NV4W as a ful-
crum, the operating mode switch may break.
System Menu
Setting Mode Display
Port
T.SW
Clock
Memory
Language
Turn ON pin 2 of the DIP switch as shown on the left to pro-
hibit moving to the System Menu
❍: Supported.
×: Not supported.
NV3W NV3W-
❍ ❍
Contrast
❍ ❍
Brightness
❍ ❍
Com port
❍ ❍
× ×
❍ ❍
SRAM
❍ ❍
FROM
× ×
SD Memory
Card
× ❍
Section 5-1
Wrong Method
PT Set PT configuration
NV4W NV3Q
V1
❍ ❍ ▲ (Only by transfer-
ring settings)
❍ ❍ ▲ (Only by transfer-
ring settings)
❍ ❍
Supported.
❍ ❍
Not supported.
❍ ❍
Not supported.
❍ ❍
Not supported.
❍ ❍
Not supported.
❍ ❍
Supported.
❍ ❍
Supported.
from the NV-
Designer.