Omron NV Series Setup Manual page 107

Configuration Settings from the System Menu
SD Memory Card Operations (NV4W and NV3Q)
Touch Panel Operation
Returning After completing the setting, touch the ESC Key to return to the previ-
ous screen.
Precautions for Correct Operation
When SRAM is initialized, the line graph data stored in SRAM will be deleted.
Line graph data and other data is not backed up. It will be initialized when the
power is turned OFF.
• With FROM initialization, the following data stored in Flash Memory will
be deleted.
• Base screen data
• PT Configuration data (This data is returned to the default settings.)
• Contrast adjustment settings data (This data is returned to the default
settings.)
Before initializing, be sure to use the NV-Designer to save the screen data in
the computer.
Touch the SD Memory Card Key in the Setting Menu to display the SD Mem-
ory Card Screen. Touch the various keys on this screen to display the corre-
sponding setting screens.
SD Memory Card Screen
Startup Screen
↓
[Setting Menu]
↓
[SD Memory Card]
SD → NV
Copies screen data from the SD memory card to the PT.
Note If the firmware version of the screen data saved on the SD memory
card differs from that of the PT, then the data will be changed to the
firm version that was set when the screen data was created.
NV → SD
Copies screen data from the PT to the SD memory card.
SD File Delete
Deletes the screen files saved in the SD memory card.
Section 5-1
87