Cr Hp Sensor; Removing The Cr Hp Sensor - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.12.6 CR HP Sensor

1. Remove the Color Measurement Device.
2. Remove the Mounter. (p132)
3. Remove the Upper Cover. (p257)
4. Open the Front Cover, and move the carriage to the right.
(Step 6 in "3.4.12.5 Paper Pressing Motor"
5. Disengage the hooks that secure the CR HP Sensor, and remove the CR HP
Sensor.
6. Disconnect the connector from the CR HP Sensor.
DISASSEMBLY & ASSEMBLY
(p255)
(P. 269))
Disassembly and Assembly Procedure
Connector
Hooks
CR HP Sensor
Figure 3-214. Removing the CR HP Sensor
Revision A
271
Confidential