Epson Stylus Pro 4910 Service Manual page 428

Epson Stylus Pro 4900/Epson Stylus Pro 4910
[Lubrication 7-3]
Part Name CR Unit
Lubrication Point Inside HOLDER, OIL PAD
Lubricants (Part Code) Grease G-84 (1516265)
Amount 0.3cc x 2 points
φ 4 mm injector
Lubrication Tool
Detach HOLDER, OIL PAD.
Lubrication Manner
Apply lubricant so as to fill in the bands inside HOLDER, OIL
PAD
Note ---
Lubrication Point
MAINTENANCE
(p181)
CR Unit
Lubrication
[Lubrication 7-4]
Part Name CR Unit
Lubrication Point On the portion where it contacts with GUIDE BOARD, CR
Lubricants (Part Code) Grease G-84 (1516265)
φ 2 x 6 mm x 1 point
Amount
φ 2 mm injector
Lubrication Tool
Apply the specified amount with an injector.
Slide in CR unit to SHAFT, CR. Apply lubricant grease to the dent
Lubrication Manner
of SLIDER, CR just before SLIDER, CR goes into GUIDE
BOARD, CR.
Note ---
Revision A
Lubrication Point
429
Confidential