Csic Check - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

4.12.5.2 CSIC Check

EXECUTION MODE
Serviceman Mode
PROCEDURE
Perform this check only when the trouble of recognizing ink
C H E C K
P O I N T amount occurs.
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu
When executing this adjustment after replacing the ink holder,
C A U T I O N
make sure to execute it before charging ink with the ink cartridge
installed.
2. Start the Service Program and select
3. Select CSIC Check on the ILS & CSIC Check screen.
4. Click [Run].
The result will be displayed on the screen.
The result is OK: Go to Step 6
The result is NG: The NG part is displayed. Go to
5. Replace the ink cartridge or maintenance box with NG display. Return to
If the trouble is not solved, replace the cartridge holder
box (P. 128).
6. Click [Finish].
ADJUSTMENT
] + [Paper Feed ] + [OK].
ILS & CSIC Check.
Step 5
(P. 239) or maintenance
Ink Supply Related Checks and Adjustments
7. Turn the printer OFF and finish the adjustment.
Step 4.
Revision A
362
Confidential