Encoder For Paper Pressing Motor; Removing The Encoder For Paper Pressing Motor - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.12.2 Encoder for paper pressing motor

1. Remove the Color Measurement Device.
2. Remove the Mounter. (p132)
3. Remove the Upper Cover. (p257)
4. Remove the I/F Cover. (p258)
5. Remove the Left Cover. (p260)
6. Disconnect the connector from the encoder for paper pressing motor.
7. Remove the screw that secures the encoder for paper pressing motor.
A) Silver, Phillips, Bind P-tite M2.6x8 (bit: No.1): one piece
When removing the encoder for paper pressing motor in the next
C A U T I O N
step, slide it to the right. Be careful not to damage the scale.
8. Slide the Encoder for paper pressing motor in the direction of the arrow to remove
it.
When installing the encoder for paper pressing motor, set it
securely until it clicks.
DISASSEMBLY & ASSEMBLY
(p255)
Disassembly and Assembly Procedure
Encoder for paper pressing motor
Connector
Figure 3-208. Removing the encoder for paper pressing motor
Revision A
Scale
A
266
Confidential