Removing The Release Shaft Holder; Removing The Actuator - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910
15. Disengage the two hooks, and remove the actuator of the Paper Thickness Sensor.
16. Disconnect the two connectors from the Paper Thickness Sensor.
17. Release the harness from the clamp.
Clamp
Figure 3-102. Removing the actuator
DISASSEMBLY & ASSEMBLY
Connectors
Paper Thickness
Sensor
Actuator
Hooks
Disassembly and Assembly Procedure
18. Remove the four screws that secure the release shaft holder.
C) Silver, Phillips, Bind machine screw M3x6: four pieces
19. Disengage the four hooks of the release shaft holder from the holes of the main
body frame.
20. Slide the release shaft to the left to remove it.
Release shaft holder
C
C
Release shaft holder
Hooks
Figure 3-103. Removing the release shaft holder
Revision A
Release shaft
C
C
Confidential
189