Epson Stylus Pro 4900/Epson Stylus Pro 4910
3.4.10 Color Measurement Device and Backing
Replacement
3.4.10.1 Color Measurement Device
Do not touch the lens of the Color Measurement Device.
C A U T I O N
When removing the Color Measurement Device, be careful not
to drop it.
1.
Turn the printer OFF, and open the Front Cover (front side cover) of the Mounter.
2.
Disconnect the ILS DC cable and ILS communication cable connected to the
Color Measurement Device.
ILS communication cable
Front Cover
Figure 3-193. Disconnecting the cables
DISASSEMBLY & ASSEMBLY
ILS DC cable
Disassembly and Assembly Procedure
3.
Lift the Color Measurement Device slightly, and remove it.
Figure 3-194. Removing the Color Measurement Device
Revision A
Color Measurement Device
Confidential
255