Edge Sensor; Removing The Edge Sensor - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.5.13 Edge Sensor

1. Remove the Front Cover. (p142)
2. Remove the Right Upper Cover.
3. Remove the Control Panel Cover.
4. Remove the Right Cover. (p139)
5. Remove the IS Unit. (p233)
6. Remove the mounting plate of the Edge Release Assy.
(Step 6 to Step 7 in "3.4.5.12 Edge Release Assy"
7. Disengage the hooks that secure the Edge Sensor, and remove the Edge Sensor.
Figure 3-122. Removing the Edge Sensor
DISASSEMBLY & ASSEMBLY
(p138)
(p136)
(P. 199))
Hooks
Edge Sensor
Disassembly and Assembly Procedure
Revision A
201
Confidential