Paper Pressing Motor; Moving The Carriage - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.12.5 Paper Pressing Motor

1. Remove the Color Measurement Device.
2. Remove the Mounter. (p132)
3. Remove the Upper Cover. (p257)
4. Remove the I/F Cover. (p258)
5. Remove the Left Cover. (p260)
6. Open the Front Cover, and move the carriage to the right.
Figure 3-211. Moving the carriage
DISASSEMBLY & ASSEMBLY
(p255)
Carriage
Front Cover
Disassembly and Assembly Procedure
7. Disconnect the connector (CN18) from the Main-C Board.
8. Release the harness from the three clamps.
Be sure to route the harness of the Paper Pressing Motor over the
tape. See Figure 3-212.
Tape
Figure 3-212. Releasing the harness
Revision A
Main-C Board
CN18
Clamp
269
Confidential