Removing The Roll Lock Sensor - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910
8. Remove the three screws that secure the "HOLDER,ROLLER,RIGHT".
B) Silver, Phillips, Round Washer Head S-tite M3x8: three pieces
B
"HOLDER,ROLLER,RIGHT"
DISASSEMBLY & ASSEMBLY
B
B
Disassembly and Assembly Procedure
9. Release the spring from the hook of the actuator.
10. Remove the "HOLDER,ROLLER,RIGHT".
11. Disconnect the connector from the Roll Lock Sensor.
12. Disengage the hook that secures the Roll Lock Sensor, and remove the Roll Lock
Sensor.
Connector
Figure 3-148. Removing the Roll Lock Sensor
Revision A
"HOLDER,ROLLER,RIGHT"
Actuator
Spring
Hook
Roll Lock Sensor
218
Confidential