Cr-Pw Sensor Initialization; Pq Sensor Adjustment - Epson STYLUS COLOR 3000 Service Manual

CR-PW Sensor Initialization

Follow the steps exactly in the way instructed, otherwise a fatal error will occur.


If these adjustments are inaccurate, proper operation of the printer is not guaranteed.
1. Make sure no paper is in the tray; enter the Sensor Check menu (See page 4-16).
2. Select CR-PWS and press Enter.

PQ Sensor Adjustment

1. Initialize the CR-PW Sensor (see above).
2. Select ASF Quantity and press Enter.
3. Make sure no paper is in the tray; press Enter.
4. Put a stack of paper or a paper quantity adjustment tool along the right edge guide of the ASF. A stack of
paper has a thickness of 0.35 to 0.36 in (9 to 9.1 mm) and consists of approximately 90 sheets of 20-lb
(75-g) paper. Press Enter; the Sensor Check menu appears.
Figure 4-10. Setting the Paper Quantity Detector Adjustment Tool
EPSON Stylus Color 3000 Service Manual
CAUTION
PQ Sensor Lever
Paper Quantity Adjustment Tool
Right Edge Guide
EPSON Stylus COLOR 3000
0.35 in. (9 mm)
4-17