Epson Stylus Pro 4910 Service Manual page 337

Epson Stylus Pro 4900/Epson Stylus Pro 4910
12. Tighten the three screws loosened in
4-44.
13. Install the CR Cover.
14. Close the Front Cover.
15. Print the adjustment pattern again and check the adjustment result.
16. Repeat Step 4 to Step 15 till the adjustment is finished.
17. Press the [F12] key and cap the Printhead.
18. Turn the printer OFF to complete the adjustment.
ADJUSTMENT
Step 10 in the inverse order shown in
Head Related Checks and Adjustments
Figure
Revision A
338
Confidential