Paper Guide Sensor; Removing The Paper Guide Sensor - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.7.5 Paper Guide Sensor

1. Remove the Front Cover. (p142)
2. Remove the Control Panel Cover.
3. Remove the Right Upper Cover.
4. Remove the Right Cover. (p139)
5. Remove the Left Cover. (p137)
6. Remove the Media Eject Cover.
7. Disconnect the connector from the Paper Guide Sensor.
8. Disengage the hook that secures the Paper Guide Sensor, and remove the Paper
Guide Sensor.
Connector
Figure 3-152. Removing the Paper Guide Sensor
DISASSEMBLY & ASSEMBLY
(p136)
(p138)
(p148)
Paper Guide Sensor
Hook
Disassembly and Assembly Procedure
Revision A
221
Confidential