Epson Stylus Pro 4910 Service Manual page 429

Epson Stylus Pro 4900/Epson Stylus Pro 4910
[Lubrication 8]
Part Name PULLEY, DRIVEN UNIT
Bearings on HOLDER, PULLEY, CR where they contact with the
Lubrication Point
shaft of PUSH, PULLEY, DRIVEN
Lubricants (Part Code) Grease G-71 (1304682)
φ 2 x 2 mm x 2 points
Amount
φ 2 mm injector
Lubrication Tool
Lubrication Manner Apply the specified amount with an injector.
Note ---
Lubrication Points
MAINTENANCE
[Lubrication 9]
Part Name PAPER GUIDE, LOWER UNIT
Lubrication Point Two hooks of Shaft Retard Reset
Lubricants (Part Code) Grease G-71 (1304682)
φ 2 x 3 mm x 2 points
Amount
φ 2 mm injector
Lubrication Tool
Lubrication Manner Apply the specified amount with an injector.
Note ---
Lubrication Points
Lubrication
Revision A
\
Confidential
430