Media Eject Correction Check & Adjustment - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910
4.13.6 Media Eject Correction Check & Adjustment
PAPER USED
Size: A4
Type: Archival Matte Paper
EXECUTION MODE
Normal Mode
STANDARD VALUE
Within ± 4
PROCEDURE
1. Turn the printer ON.
2. Set paper in the bypass feed unit, and press [Paper Feed
3. Start the Service Program and select
Adjustment.
4. Click [Run].
The adjustment pattern will be printed.
5. Check that the pattern of the most closely aligned with the upper bar (without any
gap and not overlapping each other) among the printed patterns lies within the
standard range.
Within the standard value: Go to
Out of the range: Go to Step 6
6. Input the value for the pattern of most closely aligned with the upper bar (no gap
but not overlapping each other).
7. Click [Write], and return to Step
8. Click [Finish].
9. Turn the printer OFF to complete the adjustment.
ADJUSTMENT
] to feed paper.
Media Eject Correction Check &
Step 8
4.
Media Feed Related Checks and Adjustments
Figure 4-85. [Media Eject Correction Check & Adjustment] Screen
NG OK
<Overlapped> <Aligned>
Figure 4-86. Check point
Revision A
NG
<Gapped>
376
Confidential