Epson Stylus Pro 4910 Service Manual page 258

Epson Stylus Pro 4900/Epson Stylus Pro 4910
3.4.11.3 Right Cover
1. Remove the Color Measurement Device.
2. Remove the Mounter. (p132)
3. Remove the Upper Cover. (p257)
In the next step, make sure to confirm which screw is attached to
C H E C K
P O I N T which location because various screws are used here.
4. Remove the three screws that secure the Right Cover.
A) Silver, Phillips, Round Washer Head S-tite M3x8: two pieces
B) Silver, Phillips, Bind P-tite M3x8: one piece
In the next step, make sure to slide the Right Cover straight to the
C A U T I O N
side since the guide of the Right Cover is easy to break.
5. Slide the Right Cover straight to the side to remove it.
DISASSEMBLY & ASSEMBLY
(p255)
Disassembly and Assembly Procedure
A
A
Right Cover
Figure 3-199. Removing the Right Cover
Revision A
Right Cover
B
259
Confidential