Ink Eject And Initial Charge - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

4.12.3 Ink Eject and Initial Charge

4.12.3.1 Ink Eject
EXECUTION MODE
Serviceman Mode
PROCEDURE
Required time per Ink Eject (all rows): 7 minutes
C H E C K
P O I N T
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu
2. Start the Service Program and select
3. Select Ink Eject and select the ink holder from which ink is ejected.
4. Click [Run].
5. Follow the instructions on the screen to remove all ink cartridges of the selected
ink holders.
Ink is ejected.
If ink is ejected just one time, ink may leak when removing the ink
C A U T I O N
tube. Therefore, it is better to prepare paper or cloth to clean away
the ink beforehand or eject ink twice in a row.
ADJUSTMENT
] + [Paper Feed ] + [OK].
Ink Eject and Initial Charge.
Ink Supply Related Checks and Adjustments
Figure 4-71. [Ink Eject] Screen
Revision A
358
Confidential