Epson Stylus Pro 4900/Epson Stylus Pro 4910
4.16.2.3 Paper Press Function Check
1.
Install the mounter on the printer.
2.
Start the Service Program.
3.
Connect the USB cable to the printer.
4.
Select
SpectroProofer Movement Check
5.
Select
Paper Press Function
Check.
6.
Click [Run].
The paper pressing plate operates and the result will be displayed.
The result is OK: Go to
Step 8
The result is NG: Go to
Step 7
7.
Check the wiring of the Paper Pressing Motor. If there is no abnormality on the
wiring, replace the Paper Pressing Motor
Return to
Step 6
to check again.
8.
Click [Finish].
9.
Turn the printer OFF and finish the adjustment.
ADJUSTMENT
from the inspection program.
(P.
269).
SpectroProofer Related Adjustments
Revision A
405
Confidential