Dell N1100-ON Reference Manual page 1127

User Guidelines
Use the clear dot1as statistics or the clear counters command to clear the
counters.
Command History
Introduced in version 6.2.0.1 firmware.
Example
#show dot1as statistics gi1/0/3
Port........................................... Gi1/0/3
Sync messages transmitted...................... 0
Sync messages received......................... 0
Followup messages transmitted.................. 0
Followup messages received..................... 0
Announce messages transmitted.................. 0
Announce messages received..................... 0
Pdelay_Req messages transmitted................ 0
Pdelay_Req messages received................... 0
Pdelay_Resp messages transmitted............... 0
Pdelay_Resp messages received.................. 0
Pdelay_Resp_Followup messages transmitted...... 0
Pdelay_Resp_Followup messages received......... 0
Signaling messages transmitted................. 0
Signaling messages received.................... 0
Sync receipt timeouts.......................... 0
Sync messages discarded........................ 0
Announce receipt timeouts...................... 0
Announces messages discarded................... 0
Pdelay receipt timeouts........................ 0
Pdelay messages discards....................... 0
PTP message discards........................... 0
Pdelay allowed lost responses.................. 0
Invalid AS messages received....................0
1127
Audio Visual Bridging Commands