Dell N1100-ON Reference Manual page 1328

Time Elapsed Since Last
Update
IPv6 Outbound Update
Group
Message Table
Received Update Queue
Size
The following fields are displayed for IPv4 and for IPv6.
Prefixes Advertised
Prefixes Withdrawn
Prefixes Current
Prefixes Accepted
Prefixes Rejected
Max NLFI per Update
Min NLRI per Update
Command History
Introduced in version 6.2.0.1 firmware. Modified in version 6.3.0.1 firmware.
How long since an UPDATE message has been received
from this neighbor.
The IPv6 outbound update group.
The number of BGP messages sent to and received from
this neighbor.
Received UPDATE messages are queued for processing.
This section shows the current length of the neighbor's
UPDATE queue in bytes, the high water mark, the
limit, and the number of UPDATEs that have been
dropped because the queue reached the limit.
A running count of the number of prefixes advertised to
or received from this neighbor.
A running count of the number of prefixes included in
the Withdrawn Routes portion of UPDATE messages,
to and from this neighbor.
The number of prefixes currently advertised to or
received from this neighbor. For inbound prefixes, this
count only includes prefixes that passed inbound policy.
The number of prefixes from this neighbor that are
eligible to become active in the local RIB. Received
prefixes are ineligible if their BGP Next Hop is not
resolvable or if the AS Path contains a loop. A prefix is
only considered accepted if it passes inbound policy.
The number of prefixes currently received from this
neighbor that fail inbound policy.
The maximum number of prefixes included in a single
UPDATE message, to and from this neighbor.
The minimum number of prefixes included in a single
UPDATE message, to and from this neighbor.
Layer 3 Routing Commands
1328