Status codes
Network
Next Hop
Metric
LocPrf
Path
Command History
Introduced in version 6.2.0.1 firmware.
Example
BGP table version is 0, local router ID is 65.1.1.1
Status Codes: s suppressed, * valid, > best, i - internal
Origin Codes: i - IGP, e - EGP, ? - incomplete
Network
------------------ --------------- --------- ---------- ----------
show bgp ipv6 listen range
Use the show bgp ipv6 listen range command to display information about
IPv6 BGP listen ranges.
Syntax
show bgp ipv6 [vrf vrf-name] listen range [ network/length ]
•
network/length — Displays information about the specified listen range.
•
vrf-name—The name of a previously configured VRF.
• s—The route is aggregated into an aggregate address
configured with the summary-only option
• *—Dell EMC Networking BGP never displays invalid
routes; so this code is always displayed (to maintain
consistency with the industry standard)
• >—Indicates that BGP has selected this path as the
best path to the destination
•
—If the route is learned from an internal peer
i
IPv6 Destination prefix
The route's BGP next hop
Multi-Exit Discriminator
The local preference
The AS path
Next Hop
Metric
LocPref
Layer 3 Routing Commands
Path
1323