Table of Contents
Advertisement
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration sub-modes.
User Guidelines
The following fields are displayed.
Field
Admin Mode
BGP Router ID
Local AS Number
Traps
Maximum Paths
Maximum Paths iBGP
Default Keep Alive Time
Default Hold Time
Number of Network Entries The number of distinct IPv6 prefixes in the local RIB.
Number of AS Paths
Dynamic Neighbors
Default Metric
Default Route Advertise
Redistributing
Description
Whether BGP is globally enabled.
The configured router ID.
The router's AS number.
Whether BGP traps are enabled.
The maximum number of next hops in an external BGP
route.
The maximum number of next hops in an internal BGP
route.
The configured keepalive time used by all peers that
have not been configured with a peer-specific keepalive
time.
The configured hold time used by all peers that have not
been configured with a peer-specific hold time.
The number of IPv6 AS paths in the local RIB.
The number of dynamically discovered neighbors
(current number, maximum number discovered, upper
limit allowed).
The default value for the MED for redistributed routes.
Whether BGP is configured to advertise a default route.
Corresponds to default-information originate.
Layer 3 Routing Commands
1337
Advertisement
Table of Contents
