Dell N1100-ON Reference Manual page 1210

Parameters
Registered Protocol
Local Diag
Demand mode
Minimum transmit
interval
Actual TX Interval
Actual TX Echo interval The transmitting interval being used for echo packets.
Minimum receive
interval
Detection interval
multiplier
My discriminator
Your discriminator
Tx Count
Rx Count
Drop Count
Command History
Introduced in version 6.2.0.1 firmware.
Example
console# show bfd neighbors
Local Address Neighbor
------------- --------------
172.16.10.1 172.16.10.20
10.1.10.1 10.1.10.20
fdf8:f53b::53 fdf8:f53b::58
console# show bfd neighbors details
Description
The protocol from which the BFD session was initiated and
that is registered to receive events from BFD. (for example,
BGP).
The diagnostic state specifying the reason for the most
recent change in the local session state.
Indicates if the system wishes to use Demand mode.
Note: Demand mode is not supported in Dell 6.0 8.0,
The minimum interval to use when transmitting BFD
control packets.
The transmitting interval being used for control packets.
The minimum interval at which the system can receive
BFD control packets.
The number of BFD control packets that must be missed in
a row to declare a session down.
Unique Session Identifier for Local BFD Session.
Unique Session Identifier for Remote BFD Session.
The number of transmitted BFD packets.
The number of received BFD packets.
The number of dropped packets.
Uptime
-----------
02:18:49
01:15:25
00:38:11
State Interface
------ ---------
Up VLAN10
Up Gi1/0/5
Up Gi1/0/1
Layer 3 Routing Commands
1210