Show Bgp Ipv6 Summary - Dell N1100-ON Reference Manual

Peer
Duration
Adds
Mods
Dels
Command History
Introduced in version 6.2.0.1 firmware.
Modified in version 6.3.0.1 firmware.
Example
console # show bgp ipv6 statistics
Delta T Phase Upd Grp
Dels
29:33:49 3
29:33:40 2
29:33:28 2
29:23:40 2
29:13:40 3
29:02:01 3
28:33:40 2
28:14:40 2

show bgp ipv6 summary

Use this command to display a summary of BGP configuration and status.
This command deprecates and replaces the show ipv6 bgp summary
command.
Syntax
show bgp ipv6 summary
Phase 1 of the decision process can be triggered for a
specific peer when a peer's inbound routing policy
changes or the peer is reset. When phase 1 is run for a
single peer, the peer's IP address is given.
How long the decision process took, in milliseconds
The number of routes added. For phase 1, this is the
number of prefixes that pass inbound policy and are
added to the Accept-RIB-In. For phase 2, this is the
number of routes added to the BGP routing table. For
phase 3, this is the number of prefixes added to the
update group's Adj-RIB-Out.
The number of routes modified. Always 0 for phase 1
The number of routes deleted. Always 0 for phase 1.
GenId
0 2041 Fwd status chng
2042 Accept-RIB-In-
2043 Accept-RIB-In-
2044 Accept-RIB-In-
1 2044 Phase 2 done
0 2044 Phase 2 done
2045 Phase 1 done
2046 Phase 1 done
Reason Peer Duration
34
59
10
32
48
41
32
16
Layer 3 Routing Commands
Adds Mods
750 0 500
750 0 500
0 0 250
0 0 1000
500 2500 1750
750 0 1250
500 0 0
250 0 0
1336