Msrp Max-Fan-In-Ports - Dell N1100-ON Reference Manual

MSRP is internally mapped onto multicast queues 2 and 3. Generally, unicast
traffic does not use these queues except for destination lookup failures which
are broadcast to all ports in the VLAN. Delay limits are not calculated to
accommodate such traffic.
Likewise, static configuration can place traffic onto the multicast queues and
interfere with AVB traffic. Delay limits cannot be guaranteed in such cases.
This command is only available on the N4000 Series switches.
Command History
Introduced in version 6.2.0.1 firmware.
Example
This example enables MSRP globally.
console(config)#msrp global

msrp max-fan-in-ports

Use this command to configure the fan-in value used in calculating available
bandwidth. Use the no form of the command to return the fan in to the
default.
Syntax
msrp max-fan-in-ports fan-in
no msrp max-fan-in-ports
• fan-in—The fan in value used in the calculation of available bandwidth.
The range is 0–52.
Default Configuration
The default fan-in value is 12.
Command Mode
Global Configuration
Audio Visual Bridging Commands
1095