Show Platform Messaging - Cisco Catalyst 2960 Command Reference Manual

Appendix C Catalyst 2960 Switch Show Platform Commands

show platform messaging

Use the show platform messaging privileged EXEC command to display platform-dependent
application and performance message information.
Syntax Description
application [incoming |
outgoing | summary]
hiperf [class-number]
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-8604-03
show platform messaging {application [incoming | outgoing | summary] | hiperf
[class-number]} [ | {begin | exclude | include} expression]
Display application message information. The keywords have these
meanings:
•
•
•
Display outgoing high-performance message information. Specify the
class-number option to display information about high-performance
messages for this class number. The range is 0 to 36.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
incoming—(Optional) Display only information about incoming
application messaging requests.
outgoing—(Optional) Display only information about incoming
application messaging requests.
summary—(Optional) Display summary information about all
application messaging requests.
Catalyst 2960 Switch Command Reference
show platform messaging
C-11