HP 6125XLG Layer 3 - Ip Routing Configuration Manual page 120

NOTE:
To allow Switch C in the NSSA area to reach other areas within the AS, you must provide the
•
keyword default-route-advertise for the nssa command issued on Switch A (the ABR) so that
Switch C can obtain a default route.
Configuring the nssa command with the keyword no-summary on Switch A can reduce the routing
•
table size on NSSA Switches. On other NSSA Switches, you only need to configure the nssa
command.
# Display OSPF routing information on Switch C.
[SwitchC] display ospf routing
OSPF Process 1 with Router ID 10.4.1.1
Routing for Network
Destination
0.0.0.0/0
10.2.1.0/24
10.4.1.0/24
Total Nets: 3
Intra Area: 2
4. Configure route redistribution:
# Configure Switch C to redistribute static routes.
[SwitchC] ip route-static 3.1.3.1 24 10.4.1.2
[SwitchC] ospf
[SwitchC-ospf-1] import-route static
[SwitchC-ospf-1] quit
# Display OSPF routing information on Switch D.
<SwitchD> display ospf routing
OSPF Process 1 with Router ID 10.5.1.1
Routing for Network
Destination
10.2.1.0/24
10.3.1.0/24
10.4.1.0/24
10.5.1.0/24
10.1.1.0/24
Routing for ASEs
Destination
3.1.3.0/24
Total Nets: 6
Routing Tables
Cost Type
65536 Inter
65535 Transit 10.2.1.2
3 Stub
Inter Area: 1 ASE: 0
Routing Tables
Cost Type
22 Inter
10 Transit 10.3.1.2
25 Inter
10 Stub
12 Inter
Cost Type
1 Type2
108
NextHop AdvRouter
10.2.1.1 10.2.1.1
10.4.1.1
10.4.1.1 10.4.1.1
NSSA: 0
NextHop AdvRouter
10.3.1.1 10.3.1.1
10.3.1.1
10.3.1.1 10.3.1.1
10.5.1.1 10.5.1.1
10.3.1.1 10.3.1.1
Tag NextHop
1 10.3.1.1
Area
0.0.0.1
0.0.0.1
0.0.0.1
Area
0.0.0.2
0.0.0.2
0.0.0.2
0.0.0.2
0.0.0.2
AdvRouter
10.2.1.1