Is-Is Route Redistribution Configuration Example - HP 6125XLG Layer 3 - Ip Routing Configuration Manual

Blade switch
Hide thumbs Also See for 6125XLG:
Table of Contents

Advertisement

001
# Display information about IS-IS neighbors and interfaces on Switch D.
[SwitchD] display isis peer
System Id: 0000.0000.0001
Interface: Vlan-interface100
State: Up
System Id: 0000.0000.0002
Interface: Vlan-interface100
State: Up
[SwitchD] display isis interface
Interface: Vlan-interface100
Id
001

IS-IS route redistribution configuration example

Network requirements
As shown in
to interconnect. Switch A and Switch B are Level- 1 routers, Switch D is a Level-2 router, and Switch C is a
Level- 1 -2 router.
Redistribute RIP routes into IS-IS on Switch D.
Figure 42 Network diagram
Configuration procedure
1.
Configure IP addresses for interfaces. (Details not shown.)
Up
HoldTime: 9s
HoldTime: 28s
Interface information for IS-IS(1)
----------------------------------
IPv4.State
Up
Figure
42, Switch A, Switch B, Switch C, and Switch D reside in the same AS. They use IS-IS
Down
1497
Peer information for IS-IS(1)
----------------------------
Circuit Id: 0000.0000.0001.01
Type: L2
Circuit Id: 0000.0000.0001.01
Type: L2
IPv6.State
MTU
Down
1497
164
L1/L2
No/No
PRI: 100
PRI: 64
Type
DIS
L1/L2
No/No

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5920 series5900 series

Table of Contents