HP 6125XLG Layer 3 - Ip Routing Configuration Manual page 385

3. Configure Area 2 as a stub area:
# Configure Switch D.
[SwitchD] ospfv3
[SwitchD-ospfv3-1] area 2
[SwitchD-ospfv3-1-area-0.0.0.2] stub
# Configure Switch C, and specify the cost of the default route sent to the stub area as 10.
[SwitchC] ospfv3
[SwitchC-ospfv3-1] area 2
[SwitchC-ospfv3-1-area-0.0.0.2] stub
[SwitchC-ospfv3-1-area-0.0.0.2] default-cost 10
# Display OSPFv3 routing table information on Switch D.
[SwitchD] display ospfv3 routing
-------------------------------------------------------------------------
E1 - Type 1 external route,
E2 - Type 2 external route,
*Destination: ::/0
Type : IA
NextHop : FE80::F40D:0:93D0:1
AdvRouter : 4.4.4.4
Preference : 10
*Destination: 2001::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
AdvRouter : 3.3.3.3
Preference : 10
*Destination: 2001:1::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
AdvRouter : 3.3.3.3
Preference : 10
*Destination: 2001:2::/64
Type : I
Nexthop : ::
AdvRouter : 4.4.4.4
Preference : 10
*Destination: 2001:3::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
AdvRouter : 3.3.3.3
Preference : 10
OSPFv3 Process 1 with Router ID 4.4.4.4
IA - Inter area route,
* - Selected route
373
I - Intra area route
Cost : 11
Interface: Vlan400
Area : 0.0.0.2
Cost : 2
Interface: Vlan400
Area : 0.0.0.0
Cost : 3
Interface: Vlan400
Area : 0.0.0.0
Cost : 1
Interface: Vlan400
Area : 0.0.0.2
Cost : 4
Interface: Vlan400
Area : 0.0.0.0