HP 6125XLG Layer 3 - Ip Routing Configuration Manual page 266

Step
8. Specify an IPv6 ACL to filter
routes advertised to or
received from the 6PE peer or
peer group.
9. Specify an IPv6 prefix list to
filter routes advertised to or
received from the 6PE peer or
peer group.
10. Specify a routing policy to
filter routes advertised to or
received from the 6PE peer or
peer group.
11. Advertise a default route to
the 6PE peer or peer group.
12. Save all routes from the 6PE
peer or peer group.
13. Configure BGP updates sent
to the 6PE peer or peer group
to carry only the public AS
number.
14. Specify the maximum number
of routes that BGP can receive
from the 6PE peer or peer
group.
15. Specify a preferred value for
routes received from the 6PE
peer or peer group.
16. Configure the device as a
route reflector and the 6PE
peer or peer group as a client.
17. Return to user view.
18. Display information about the
6PE peer or peer group.
19. Display routing information
advertised to or received from
the 6PE peer or peer group.
20. Perform soft reset on the
inbound or outbound BGP
6PE connection.
21. Reset a BGP 6PE connection.
Command
peer { group-name | ip-address }
filter-policy acl6-number { export |
import }
peer { group-name | ip-address }
prefix-list ipv6-prefix-name { export |
import }
peer { group-name | ip-address }
route-policy route-policy-name
{ export | import }
peer { group-name | ip-address }
default-route-advertise [ route-policy
route-policy-name ]
peer { group-name | ip-address }
keep-all-routes
peer { group-name | ip-address }
public-as-only
peer { group-name | ip-address }
route-limit prefix-number [ { alert-only
| reconnect reconnect-time } |
percentage-value ] *
peer { group-name | ip-address }
preferred-value value
peer { group-name | ip-address }
reflect-client
return
display bgp peer ipv6 [ unicast ]
[ group-name log-info | ip-address
{ log-info | verbose } | verbose ]
display bgp routing-table ipv6
[ unicast ] peer ip-address
{ advertised-routes | received-routes }
[ network-address prefix-length |
statistics ]
refresh bgp ip-address { export |
import } ipv6 [ unicast ]
reset bgp ip-address ipv6 [ unicast ]
254
Remarks
By default, no ACL is specified.
By default, no IPv6 prefix list is
specified.
By default, no routing policy is
specified.
By default, no default route is
advertised.
By default, routes from a peer
or peer group are not saved.
By default, this feature is not
configured.
By default, the number of routes
that a router can receive from
the 6PE peer or peer group is
not limited.
By default, the preferred value
is 0.
By default, no route reflector or
client is configured.
N/A
Available in any view.
Available in any view.
Available in user view.
Available in user view.